Request a Quote
+1-647-342-2118 America
Eave trim roll forming machine
Download PDF file

Eave trim is a typical flashing for roofing.
Eave trim is installed on the board, which is called the face board.
In addition to the decoration function, it protects the integrity of the roof and protects it from damage.
Eave trim is mounted after the roof boarding is ready and insulation material is placed under it.
Eave trim do the following functions:

  • protects from wetting the face board of the eaves in the event of precipitations;
  • prevents the ingress of moisture under the roof and into the interior;
  • gives an attractive appearance

Eave trim roll forming machine is integral part of the eave trim roll forming line.
Group of companies «Rusсana Engineering» offers for your consideration Eave trim roll forming line.

Raw material requirements

Light-gauge galvanized steel with polymer coating: polyester, plastisol
Zinc coating to range 100…275 g/m²
Yield strength 280…350 N/mm²

Coil thickness 0,45 mm up to 0,6 mm
Coil width 178 mm ±0,5mm
General characteristics
Line operating mode semi automatic/automatic
Installed power capacity, no more than 8 kW
Maximum cutting speed, no more than 20 m/min
Supply voltage at frequency of 50 Hz ± 0.4Hz 380 V

Dimensions (LxWxH), no more than

9900х2000х1400 mm

Weight, no more than 2400 kg
Required operation personnel 1-2 persons
Line configuration
1. Decoiler
2. Roll forming section
3. Guillotine (integrated into rill forming section)
4. Roller base receiving table ( 4 pcs.)

5. Automatic Control System (ACS)

Item Description

Hydraulic mandrel expansion.

Is used for decoiler and intendant for coil reliable fixation on the decoiler’s shaft.

On and Off is done with the button.
Receiving table roller.

Is intendant for receiving ready product.

PROFILE DRAWING flashing line

flashing line