Request a Quote
+1-647-352-2262 America
sales@ruscana-engineering.com
Wall panel machine «Bar 14» and «Bar 21»
Download PDF file

Wall panels «Bar 14» and «Bar 21» are the latest types of metal siding, which imitates a wooden bar look.

Metal Siding combines all the advantages of light-gauge sheet metal along with presentable wooden bar look.

The advantages of «Bar 14» and «Bar 21»:

  • resistance to sharp temperature changes;
  • no flammability;
  • corrosion resistance, increased resistance to atmospheric precipitation, ultraviolet and aggressive environments;
  • low coefficient of thermal expansion;
  • high strength characteristics, resistance to mechanical influences;
  • manufacturability, convenience and reliability of installation (fast installation at any time of the year);
  • hidden fastenings;
  • cladding panel allows you to reduce the cost for heating the house (however the cladding is breathing, since it is not closed tightly);
  • attractive appearance;
  • environmental safety.

As a result, you get not expensive and aesthetically attractive cladding that can change the appearance of the building.

Company «Rusсana Engineering» offer for your consideration wall panel machine «Bar 14» and «Bar 21».
Wall panel machine «Bar 14» and «Bar 21» is an integral part of the roll forming line.
This panel roll forming line is reliable, convenient in operation and produce high quality end product.

DISTINCTIVE FEATURES

High production speed.

2 options of wall panel «Bar»

Company «Rusсana Engineering» offer for your consideration wall panel machine «Bar 14» and «Bar 21».

More than 5 types of decorative embossing for wall panel «Bar».

Variety of wall panel types.
Machine by individual order.
For today, there are lots of metal wall panel types.
Company «Ruscana Engineering» is ready to offer you a standard metal panel types and develop and manufacture machine to produce original look wall panel in accordance with your sketch.

Consistent roll forming method.
Consistent roll forming method provides high-quality roll forming of raw materials from different suppliers.
Roll forming starts from the center, gradually spreading over the entire surface of the metal sheet, thereby relieving tension in the metal.
This method allows you roll form raw materials of different quality.

Automatic control system (ACS).
Automatic control system or ACS is based on hardware Omron (Japan) which meets reliable performance. The company «Ruscana Engineering» has developed a very user-friendly interface with various controlled parameters, such as: feeding speed, quantity/length of products, production task and many other. The system is also equipped with alarm and error indicators and support information as well as maintenance service information.

Quality components.
Quality electronic, hydraulic and pneumatic components of the leading industry suppliers: spherical, self-centering bearing units (Askubal, Germany); hydraulic and pneumatic components (Made in Italy); electronic components (Omron, Japan).

The shafts of the rolling mill are made of solid rolled steel and is being heat treated and polished, which makes it possible to achieve a high resistance to deflection and to minimize beating.

Volume hardening of profiling rollers, allows to increase their life in 50 times

Safety.
The rolling mill zone and drive mechanisms are covered with protective covers, which ensures safe working conditions and excludes direct entry of dust, moisture and foreign objects.

Competitive price.

The price of equipment is lower than European and North American manufacturers have for similar equipment.
Warranty and post warranty service.
GENERAL INFORMATION
WALL PANEL MACHINE «BAR 14»
Raw material requirements
Material

Light-gauge galvanized steel with polymer coating: polyester, plastisol
Zinc coating to range 100…275 g/m²
Yield strength 280…320 N/mm²

Coil thickness  0,45 mm up to 0,6 mm
Coil width 312,5 mm±2mm
General characteristics
Line operating mode adjustable/automatic
Installed power capacity, no more than 6,5 kW
Roll forming speed, no more than 15 rm/min
Supply voltage at frequency of 50 Hz 380 V
Supply voltage at frequency of 60 Hz 230 V  3 phase
Dimensions (LxWxH),  no more  than 15600х2100х1450mm (receiving table is included)
Weight, no more than 3650 kg
Required operation personnel 1-2 persons
WALL PANEL MACHINE «BAR 21»
Raw material requirements
Material

Light-gauge galvanized steel with polymer coating: polyester, plastisol
Zinc coating to range 100…275 g/m²
Yield strength 280…320 N/mm²

Coil thickness  0,4 mm up to 0,6 mm
Coil width 416,5 mm±2mm
General characteristics
Line operating mode adjustable/automatic
Installed power capacity, no more than 9 kW
Roll forming speed, no more than 20 rm/min
Supply voltage at frequency of 50 Hz 380 V
Supply voltage at frequency of 60 Hz 230 V  3 phase
Dimensions (LxWxH),  no more  than 15600х2100х1450mm (receiving table is included)
Weight, no more than 4600 kg
Required operation personnel 1-2 persons
PROFILE DRAWING decorative wall panel roll forming machine
GET A QUOTE
  • Wall panel machine «Bar 14» and «Bar 21»
  • Wall panel machine «Bar 14» and «Bar 21»
  • Wall panel machine «Bar 14» and «Bar 21»
  • Wall panel machine «Bar 14» and «Bar 21»
  • Wall panel machine «Bar 14» and «Bar 21»
  • Wall panel machine «Bar 14» and «Bar 21»