Post and rail roll forming line

Catalog Roll forming machines Fence lines Post and rail roll forming line

Post and Rail is roll formed from high-quality raw materials - strong steel with hot galvanizing covering.
The fencing system includes the following elements: posts of various configurations, rails, fastening elements (connecting plates, self-tapping screws).
The technology of production fencing systems is such that it allows to assembly on site without the use of special tools. All the elements and fasteners are completely ready for assembling, which can be done by only 2 people.
Stages of the construction of the fence frame system:

mark out the space, installation of marking posts along its edges;
digging holes for supporting posts every 2.5 m (the ground is dug out for a width of 30 cm, a depth larger than the depth of freezing of the soil (1.2-1.5 meters);
installation of post into prepared holes, leveling, concreting;
installation of the fence frame: it is necessary to install rails to the posts using self-tapping screws.

Group of companies «Rusсana Engineering» offers for your consideration Post and rail machines.
Post machine and rail machine are integral part of the roll forming line.

GENERAL INFORMATION RAIL

Raw material requirements
Specification	40x40x1mm	40x40x1,2mm
Material	Light-gauge galvanized steel Zinc coating to range 100…275 g/m²
Coil thickness	1,0 мм	1,0 мм….1,2 мм
Coil width	183,1 мм
General characteristics
Line operating mode	manual/automatic
Installed power capacity, no more than	27,5 kW
Roll forming speed, no more than	12 rm/min
Supply voltage at frequency of 50 Hz ± 0.4Hz	380 V
Dimensions (LxWxH), no more than	17800х2350х1700 mm
Weight, no more than	8000 kg
Required operation personnel	1-2 persons
Line configuration
1. Decoiler
2. Сlamping unit for decoiler/Pneumatic
3. Preliminary die cut module
4. Roll forming section
5. Hydraulic system
6. Hydraulic guillotine
7. Receiving table
8. Automatic Control System (ACS)

40x40x1mm	40x40x1,2mm
Download PDF file	Download PDF file

GENERAL INFORMATION POST

Raw material requirements
Specification	67x50x1,5mm	60x80x1,5mm	60x40x2,0mm
Material	Light-gauge galvanized steel Zinc coating to range 100…275 g/m² Yield strength 280…350 N/mm²
Coil thickness	1,2 mm….1,5mm	1,2 mm….1,5mm	1,7 mm….2,0mm
Coil width	250 mm	300 mm	218,5mm±0,5mm 221,5mm±0,5mm
General characteristics
Line operating mode	adjustable/automatic
Installed power capacity, no more than	32 kW	31,5 kW	32 kW
Roll forming speed, no more than	12 rm/min
Supply voltage at frequency of 50 Hz ± 0.4Hz	380 V
Dimensions (LxWxH), no more than	22750х2350х1700 mm
Weight, no more than	6500 kg	9000 kg	5550 kg
Required operation personnel	1-2 persons
Line configuration
1. Decoiler
2. Сlamping unit for decoiler/Pneumatic
3. Preliminary die cut module
4. Roll forming section
5. Hydraulic system
6. Hydraulic guillotine
7. Receiving table
8. Automatic Control System (ACS)

67x50x1,5mm	60x80x1,5mm	60x40x2,0mm
Download PDF file	Download PDF file	Download PDF file

OPTIONS

For Post 67х50х1,5 roll forming line
Description
Post 40х40х1,2 roll forming line
Rolling table, 1 pcs
Mechanical press J23-63D, mad byYangli, China
Stamp №1
Stamp №2

GET A QUOTE