Rounded ridge cap is a typical representative of flashings, designed for connection of the slope of roof in it's highest position.
It is an important component in the construction of the roof and occupies a dominant position.
In addition to the decoration function, it also has two main functions:
- Protection from leaking, ingression of rain or melt water into the under-roof space.
- Provision of the necessary clearance for ventilation of the under-roof space, so that the vapor can be led out of the elements of the roofing pie and insulation is dried up.
Rounded ridge cap roll forming machine is integral part of the rounded ridge cap roll forming line.
Group of companies «Rusсana Engineering» offers for your consideration Rounded ridge cap roll forming line.
| GENERAL INFORMATION |
| Raw material requirements |
| Material |
Light-gauge galvanized steel with polymer coating: polyester, plastisol
Zinc coating to range 100…275 g/m²
Yield strength 280…350 N/mm²
|
| Coil thickness |
0,45 mm up to 0,55 mm |
| Coil width |
416,6 mm ±1 mm |
| General characteristics |
| Line operating mode |
adjustable /automatic |
| Installed power capacity, no more than |
12 kW |
| Roll forming speed, no more than |
5…7 rm/min |
| Supply voltage at frequency of 50 Hz ± 0.4Hz |
380 V |
|
Dimensions (LxWxH), no more than
|
11500х2250х1450 mm |
| Weight, no more than |
3300 kg |
| Required operation personnel |
1-2 persons |
| Line configuration |
| 1. Decoiler |
| 2. Roll forming section |
| 3. Hydraulic press |
| 4. Hydraulic guillotine |
| 5. Hydraulic system |
| 6. Roller base receiving table (Single roller on three-point structure, 3 pcs.) |
|
7. Automatic Control System (ACS)
|
|
| OPTIONS |
| Item |
Description |
|
Hydraulic mandrel expansion.
|
Is used for decoiler and intendant for coil reliable fixation on the decoiler’s shaft.
On and Off is done with the button. |
| Receiving table roller. |
Is intendant for receiving ready product.
|
|
